D/I Mux III Intelligent Multiplexer Product Descriptions Coastcom's
D/I Mux III Intelligent T1 access multiplexers offer fully programmable,
software controlled T1 voice and data multiplexing. D/I Mux III
supports up to 48 voice circuits, 24 super-rate data circuits,
120 subrate data circuits or a combination of voice/data over
a single or dual T1 facility. Common equipment and voice/data
channel units are fully interchangeable among all three shelf
sizes allowing for full compatibility over the D/I Mux III product
series. D/I Mux III can be software configured as a Channel Bank,
a Drop-and-Insert Multiplexer, or a Dual Channel Bank supporting
two T1 spans simultaneously. Powerful software controlled features
offer local and remote Operations, Administration, and Maintenance
(OA&M) capabilities. Special Features include Time-of-Day
Bandwidth Reallocation and DACS Grooming. The system carries
UL, CSA, FCC Parts 15 and 68 and Canadian D.O.C approval and
is compatible with all major telecom carrier’s switched
services and virtual private network services. All systems support
both T1 and Fractional T1 services with optional support for
both AT&T and ANSI non-intrusive performance monitoring standards.
D/I Mux III Features:
- Supports 2 T1 lines with up to 48 channels.
- Integrated features include a dual smart CSU; FDL processor;
24VDC power supplies; redundant 48VDC power supplies or 110
VAC power supplies with ringer.
- Programmable control over your T1 network with our
PC-based NCC network manager.
- Quickly set up channels for services that are only used
occasionally, and return to normal traffic just as quick.
- Can be programmed to automatically dial-out to our network
manager or any ASCII printer in response to an alarm.
- Functions with a variety of bi-directional voice and data
channel cards, which can be software controlled.
- Can be mounted directly into a rack or set as a free standing
unit.
D/I Mux III with SNMP Features:
- Share a network management platform with several devices
such as DSUs, CSUs, modems, bridges, and routers.
- Supports MIB2 and DS1 MIBs.
- Integrate new software releases with a PCMCIA card for fast
upgrades.
- Local serial interface makes programming easy through a
VDT or PC.
- A 10BASE-T Ethernet port provides access to the D/I Mux
III through
a LAN.
- A SLIP interface allows communication between two remote
points via an RS-232C serial connection.
|
